EDT Engineering Design Team

Epix

Camera Link frame grabbers & simulation

PIXCI ® EC1 & ECB1

EDT - Engineering Design Team

Camera Link frame grabbers & simulation

Camera Link solutions for a wide variety of platforms, including PCI, PCI Express, PMC and Compact PCI.

frame grabber, capture cardPCIe8 DV C-LINK
Camera-Link interface for PCI express -- eight-lane board with two connectors provide connectivity for one or two base mode cameras, or one medium or full mode camera and data rates up to 1GB/sec or more (PRELIMINARY).

frame grabber, capture cardPCIe4 DV C-LINK
Camera-Link interface for PCI express (formerly PCIe DV C-Link) -- four-lane board with two connectors provide connectivity for one or two base mode or one medium mode camera and data rates up to 220 MB/sec.

frame grabber, capture cardPCI DV C-LINK
Camera-Link interface for PCI bus -- half-length card with two connectors provide connectivity for one or two base mode cameras or one medium mode camera.

frame grabber, capture cardPCI DV CLS
Camera-Link simulator for PCI bus -- half-length card with two connectors provide simulated Camera Link output, base or medium mode, with data read from disk or generated from internal counters.

frame grabber, capture cardPMC DV C-LINK
Camera Link interface for PMC -- single connector provides connectivity for one base camera.

frame grabber, capture cardcPCI DV C-LINK
Camera-Link interface for Compact PCI -- 3u or 6u board provides connectivity for one or two base mode cameras or one medium mode camera.


aia connector AIA (LVDS & RS-422) frame grabbers

aia connector AIA (LVDS & RS-422) frame grabbers

EDT - Engineering Design Team

aia connector AIA (LVDS & RS-422) frame grabbers

High-speed Interfaces for AIA format, supporting a wide variety of cameras.

frame grabber, capture cardPCI DVa
EDT's newest technology CCD and CMOS camera interface provides higher speed, lower cost image capture for RS-422 or LVDS devices.

frame grabber, capture cardPCI DVK
A PCI DV with a 68-pin connector, optimal for straight-through cabling to 68-pin cameras such as the Roper/ Redlake MEGAPLUS series.

frame grabber, capture cardPMC DVK
A PMC version of the PCI DVK, with a 68-pin connector, provides camera connectivity in ruggedized and embedded systems.

frame grabber, capture cardPCI DV44
A PCI DV with a 44-pin connector, for simple, straight-though cabling to DVC 1300 and 1400 series cameras.

frame grabber, capture cardPCI DV
EDT's original PCI bus camera interface, with an 80-pin connector that provides connectivity to a wide variety of LVDS or RS-422 cameras. This board has been superseded by the functionally superior PCI DVa, but is still offered for legacy applications.


Multi-rate serial digital video interface for DVB-ASI/SMPTE

PIXCI ® E4

EDT - Engineering Design Team

Multi-rate serial digital video interface for DVB-ASI/SMPTE

The MSDV is a mezzanine board that pairs with an EDT main board (for PCI or PCI Express) for high-speed data transfer. It has four BNC connectors to support up to four serial digital video signals in DVB-ASI/SMPTE format.

The MSDV includes a programmable Xilinx Virtex 5 FPGA and a time code input, which receives a signal in 1 pps or IRIG-B format. This feature provides precise timestamp data for a variety of purposes.

frame grabber, capture cardDownload Datasheet

Previous page: Frame Grabbers / Capture Cards
Next page: Epix